DIFFERENTIAL SHAFTS – Series 1250 DFX & 1250 DFB
Series 1250 DFX – Standard Model Series 1250 DFB – Low tension or Large Diameter Model The Series 1250-DFX & 1250-DFB differential shafts are the industry standard. Our patented core clutch differential shaft is the preferred design by major OEMs and the choice by major converting houses for upgrading older machines. These shafts produce and maintain the most precise and constant web tensions and are designed specifically for your operation. The Series 1250-DFX can wind multiple cores and/or different width cores at very low web tensions. Each core can slip at a controlled speed when proper air pressure is maintained. The temperature resistant segments on our patented tension ledge expand outward when inflated, generating resistance against the inside diameter of the core. The resistance is proportional to the area that is contacted and permits cores with different widths to be wound on the same shaft. Each shaft also comes with our patented core stop ledge housed in a removable cassette. The core stop ledge expands outward pneumatically and locks the cores into predetermined positions along the surface of the shaft. The core stops rotate (eliminating dust) alongside the core wall during the run and prevents cores from moving horizontally during the winding process. When deflated, the core stop ledge retracts below the surface of the shaft body and permits your operator to easily remove the finished rolls. The removable core stop cassette design greatly reduces machine down time by allowing your operator to remove the cassette for the previous job and replace it with another already set-up with the core stops in the correct positions for the next job. The patented Series 1250-DFB model utilizes surface roller bearings that minimize drag. This shaft is an excellent choice for your low tension applications or for larger diameter (6″ and greater) differential winding needs.